| CAS No.: | 367-51-1 |
|---|---|
| EINECS: | 206-696-4 |
| Classification: | Specific Reagents |
| Grade: | Mining |
| Specific Usage: | Mining |
| Content: | Standard |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Partial or Complete Replacement of Lime with Sulfur Depressant DS102 in Flotation
Sulfur depressant DS102 is an efficient and environmentally friendly inhibitor that can suppress pyrite and magnetite under low alkalinity conditions during the flotation process of high sulfur copper ore, lead zinc ore, and copper lead zinc ore. It has the characteristics of environmental protection, low dosage, strong inhibition, and good selectivity, and has a significant effect on inhibiting sulfur and improving the quality of target mineral concentrates. It can partially or completely replace lime.
|
Physical State
|
Liquid |
|
Odor
|
Yellow to brown liquid |
|
Appearance
|
Slightly odorous
|
|
Specific Gravity
|
1.0-1.1
|
With the development of society, the resource utilisation rate is increasing, the nature of the ore is getting more and more complicated, and the technical difficulty of ore dressing is getting bigger and bigger. Complex polymetallic sulphide ore original ore nature is variable, close symbiotic relationship, account for each other, especially copper and sulphur minerals are very similar in nature, they are embedded in microfine grains symbiosis, separation is very difficult.
At present, the most widely used method to inhibit pyrite is the lime method. This method has good separation effect, can obtain high copper concentrate grade and recovery rate, but the use of high alkali medium leads to the traditional process there are unavoidable defects: in the high alkali medium, lime on the ore copper, sulfur, gold, silver and other minerals have different degrees of inhibition, not conducive to the further improvement of the copper index, especially not conducive to the accompanying gold, silver and other valuable metals of the comprehensive recovery; copper tailings of sulfur is Strongly inhibited, only by adding activator to achieve the copper tailing election of sulfur, resulting in a serious waste of resources, increasing the cost of flotation; and lime in industrial production in large quantities, prone to plugging, scaling, easy to corrode the equipment; in addition, the beneficiation wastewater of the process of high alkalinity, high cost of wastewater treatment.
Therefore, the development of a new, environmentally friendly, safe pyrite inhibitor has been imperative, in line with the current energy-saving and environmental protection national policy, but also for the enterprise to solve the problem of high alkalinity of wastewater.
The mechanism of action for this pyrite depressant involves its reaction with the surface of pyrite upon introduction into the slurry. This reaction leads to the formation of a stable complex, rendering the surface of pyrite hydrophilic and preventing its adsorption with bubbles. Consequently, the treated pyrite is unable to enter the flotation foam layer and instead becomes a foam product, facilitating the separation of pyrite from the desired target minerals.
Our Advantages
1. background: more than 40 years of experience in the mining industry;
2. products: patented products, specialised in complex and difficult to select ores, to provide you with the products you need;
3. technical services: according to the different application environments to adjust the formula, recommend the most suitable product model;
4. samples, if required.
FAQ
Q1. Where is your factory located?
Our factory is in shandong, China. Located in an independent chemical park.
Q2. Can you give me a better price?
We value the cooperation with each customer and will provide you with the most favorable price.
Q3. How can you guarantee your quality?
Our production adopts fully automated production control to ensure the continuity of production and the stability of quality.
We have a strict production quality management system. Strict quality control is implemented on the raw materials, semi-finished products, finished products and products leaving the factory.
Quality first has always been the basic principle of our company. We also support customers to obtain samples for testing.
Q4. When is the delivery time?
Our production capacity: Xanthate: 50,000t/a; Dithiophosphate: 20,000t/a; Frother: 10,000t/a
For conventional products, we will keep inventory to ensure timely delivery within the time required by customers.
Q5: Which type of shipping would be better?
In consideration of the requirements of the customers in different rigions, we make deliveries by sea, air, train, truck, etc.
Q6: What's the convenient way to pay?
Bank T/T, Paypal be accepted. If you have a better idea, welcome to share with us.
Q7: Can i get a sample?
Yes, you are welcome to get samples for testing.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}